After Midnight - A deep and velvety dark blue with distinctive teal tones. Think shadowy depths of an island lagoon. Completely adaptable, strong and dramatic in any setting and a perfect backdrop for neutrals or jewel tones. Fabulous teamed with mid-century teak or cool scandi vibes if they are your thing. Similar to Into the Night but a little greener.
Frenchic Trim Paint Range has a lovely, subtle satin sheen and is perfect for skirtings, doors and radiators, teamed with the matching ultra-matte Chalk Wall Paint.
Also works fantastically used in its own right for other interior surfaces including furniture and kitchens!
Water based with high scuff-resistance, minimal VOC content, UKCA and EN 71-3 certification, it is ideal for nurseries - or any other room for that matter!
47.90€ per L
Colour also available as:
Chalk Wall Pain
Al Fresco
Information | |
---|---|
Ingredients | Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative. *EN 71-3:2013+A1:2014 Safety of toys - Part 3: Migration of certain elements. |
Safety | Keep out of reach of children. Read label before use. If medical advice is needed, have product container or label at hand. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains Reaction mass of: -chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. EU limit value for this product (Cat: IIA/a): 30g/l (2010.) This product contains a maximum of 5 g/l VOC. |
Storage | Cleaning and storage: Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with warm, soapy water. Do not store or use in extremes of temperature, and always protect from frost. |
Application | |
Application | Application: Use a quality Frenchic brush, or to eliminate the risk of brush marks, a medium pile roller. Drying: Product is touch-dry in 1 hour and hard dry within 2 hours. If a second is needed, apply after 2 hours. |
Other | Preparation: All surfaces must be clean and dry. Any loose or flaking existing paint must be removed prior to painting. For an even surface, fill any holes or gouges with a superior quality surface filler, and sand smooth any protrusions. |