Chateau Chic - Add a little je ne sais quoi to your space with this pale toned, greyish green. There is a little yellow in its base that lifts it out of the ordinary. Similar to Breezing - which is a little greyer and cooler.
Frenchic Trim Paint Range has a lovely, subtle satin sheen and is perfect for skirtings, doors and radiators, teamed with the matching ultra-matte Chalk Wall Paint.
Also works fantastically used in its own right for other interior surfaces including furniture and kitchens!
Water based with high scuff-resistance, minimal VOC content, UKCA and EN 71-3 certification, it is ideal for nurseries - or any other room for that matter!
47.90€ per L
Colour also available as:
Chalk Wall Paint
Information | |
---|---|
Ingredients | Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative. *EN 71-3:2013+A1:2014 Safety of toys - Part 3: Migration of certain elements. |
Safety | Keep out of reach of children. Read label before use. If medical advice is needed, have product container or label at hand. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains Reaction mass of: -chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. EU limit value for this product (Cat: IIA/a): 30g/l (2010.) This product contains a maximum of 5 g/l VOC. |
Storage | Cleaning and storage: Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with warm, soapy water. Do not store or use in extremes of temperature, and always protect from frost. |
Application | |
Application | Application: Use a quality Frenchic brush, or to eliminate the risk of brush marks, a medium pile roller. Drying: Product is touch-dry in 1 hour and hard dry within 2 hours. If a second is needed, apply after 2 hours. |
Other | Preparation: All surfaces must be clean and dry. Any loose or flaking existing paint must be removed prior to painting. For an even surface, fill any holes or gouges with a superior quality surface filler, and sand smooth any protrusions. |