Steaming Green - A wonderful, easy-going, deep green, blessed with a familiar, Heritage feel. Supremely easy-going and versatile, its smokiness and faint aqua undertones sitting well in both contemporary and traditional spaces and palettes.
Award-winning, Frenchic Chalk Wall Paint Range is luxurious, practical and totally scrubbable.
Ultra-matte and velvety with really excellent coverage, this revolutionary product will enhance any room it graces.
Applied in only 1-2 coats, it is breathable, durable and has virtually no odour.
With minimal VOC content, it has achieved an ISO11998 Class 1 Wet Scrub rating, plus UKCA and EN 71-3 certification.
This means it is ideal for painting nurseries and any other interior rooms - see matching soft-satin Trim Paint for skirtings and woodwork.
But it's not just for walls!
It is also great for other interior surfaces like ceramic wall tiles, furniture and wood or concrete floors!
Colour also available as:
Soft satin Trim Paint range
Weatherproof Al Fresco inside/outside range
Chalk Wall paint tester sachet
27.18€ per L
Information | |
---|---|
Ingredients | Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative. *EN 71-3:2013+A1:2014 Safety of toys - Part 3: Migration of certain elements. |
Safety | Keep out of reach of children. Read label before use. If medical advice is needed, have product container or label at hand. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains Reaction mass of: -chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. EU limit value for this product (Cat: IIA/a): 30g/l (2010.) This product contains a maximum of 5 g/l VOC. |
Storage | Cleaning and storage: Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with warm, soapy water. Do not store or use in extremes of temperature, and always protect from frost. |
Application | |
Application | Application: Use a quality Frenchic brush, or to eliminate the risk of brush marks, a medium pile roller. Drying: Product is touch-dry in 1 hour and hard dry within 2 hours. If a second is needed, apply after 2 hours. |
Other | Preparation: All surfaces must be clean and dry. Any loose or flaking existing paint must be removed prior to painting. For an even surface, fill any holes or gouges with a superior quality surface filler, and sand smooth any protrusions. |