Wall Paint - Vintage Rosie 2.5L

Availability:
Pre-Order
Product Code:
WP2.5Vintage Rosie
67.95
Price in reward points: 100

Vintage Rosie - You really can have it all with this unusually dusky and slightly serious pink. Exquisite as a backdrop for your vintage finds and favourite things. Easy to pair with whites or off-whites, but try it with deep greys or blues and gold to create a stunning effect.

• Ultra-matte, luxurious and practical
• Superior coverage
• Minimal VOCs and virtually no odour
• Totally scrubbable (ISO11998 Class 1 Wet Scrub)
• Suitable for multiple interior surfaces
• UKCA and EN71-3 certification
• Water based formula

Colour also available as:
 Soft satin Trim Paint range

Chalk Wall paint tester sachet


27.18€ per L 



Share

Information
Ingredients Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative. *EN 71-3:2013+A1:2014 Safety of toys - Part 3: Migration of certain elements.
Safety Keep out of reach of children. Read label before use. If medical advice is needed, have product container or label at hand. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains Reaction mass of: -chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. EU limit value for this product (Cat: IIA/a): 30g/l (2010.) This product contains a maximum of 5 g/l VOC.
Storage Cleaning and storage: Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with warm, soapy water. Do not store or use in extremes of temperature, and always protect from frost.
Application
Application Application: Use a quality Frenchic brush, or to eliminate the risk of brush marks, a medium pile roller. Drying: Product is touch-dry in 1 hour and hard dry within 2 hours. If a second is needed, apply after 2 hours.
Other Preparation: All surfaces must be clean and dry. Any loose or flaking existing paint must be removed prior to painting. For an even surface, fill any holes or gouges with a superior quality surface filler, and sand smooth any protrusions.